MAINTENANCE

MAINTENANCE CHART

FREQUENCY

MAINTENANCE REQUIRED

COMMENTS

 

 

 

Daily or before each

Maintenance engine.

Refer to the Engine Owner’s Manual.

use

 

 

 

 

 

 

Examine blade(s).

Check for cracks, wear, and excessive

 

 

damage.

 

 

 

 

Remove debris from unit and mowing area.

 

 

 

 

 

Examine all rotating and sliding parts.

 

 

 

 

 

Check tire inflation.

Refer to the Maintenance section.

 

 

 

 

Verify that the mower housing is level.

Refer to the Maintenance section.

 

 

 

 

Examine V–belts.

Check for cracks, wear, and excessive

 

 

damage.

 

 

 

 

Check brake operation.

Refer to the Operation and Maintenance

 

 

sections.

 

 

 

After completion of

Change oil.

Refer to the Engine Owner’s Manual.

first 5 hours

 

 

 

 

 

After 25 hours

Maintenance engine.

Refer to the Engine Owner’s Manual.

 

 

 

 

Remove, examine, sharpen, and balance

Refer to Maintenance section.

 

blade(s).

 

 

 

 

 

Check adjustments:

Refer to Maintenance section.

 

a. Blade Rotation Control

 

 

b. Brake

 

 

c. Clutch

 

 

d. Steering

 

 

 

 

 

Lubricate chassis and mower housing.

Refer to Where to Lubricate instructions.

 

 

 

 

Check the muffler:

Refer to Maintenance section.

 

a. Torque

 

 

b. For wear or burn out

 

 

c. Condition of spark arrestor, (if applicable).

 

 

 

 

Before storage of 30

Prepare engine for storage.

Refer to the Engine Owner’s Manual.

days or more

 

 

 

 

 

 

Drain fuel system.

Refer to warnings in the Owner’s Manual.

 

 

 

 

Add fuel stabilizer.

Refer to the Engine Owner’s Manual.

 

 

 

 

Prepare battery for storage:

 

 

a. Remove from unit.

 

 

b. Fully charge.

 

 

c. Move to cool dry place.

 

GENERAL RECOMMENDATIONS

1.The owner’s responsibility is to maintain this product. This will extend the life of the product and is also necessary to maintain warranty coverage.

2.Check the spark plug, drive brake, lubricate the unit, and clean the air filter once a year.

3.Check the fasteners. Make sure all fasteners are tight.

4.Follow the Maintenance section to keep the unit in good operat- ing condition.

WARNING: Before you make an inspection, adjust- ment, or repair to the unit, disconnect the wire to the spark plug. Remove the wire from the spark plug to prevent the engine from starting by accident.

NOTE: Torque is measured in foot pounds (metric Nm). This measurement describes how tight a nut or bolt must be. The torque is measured with a torque wrench.

HOW TO

CHECK THE MUFFLER

Check the muffler every 50 hours. Make sure the muffler is correctly mounted and is not loose. If the muffler is worn or burnt, replace with a new muffler. A worn muffler is a fire hazard and can also damage the engine.

If you mount a spark arrester to the muffler, also check the spark arrester when you check the muffler. If the spark arrester is worn or damaged, replace it with a new spark arrester. See your nearest authorized service center for a spark arrester.

F–030753L

21

Page 20 Page 22
Page 21
Image 21
Murray 425604x18A manual Frequency Maintenance Required Comments, General Recommendations, HOW to Check the Muffler
Page 20 Page 22

425604x18A specifications

The Murray 425604x18A is a powerful and versatile lawn mower engineered to meet the needs of both residential and commercial users. With its robust design and advanced features, this mower stands out in the market, ensuring efficient lawn maintenance for a variety of grass types and terrains.

One of the key features of the Murray 425604x18A is its reliable engine. Powered by a high-performance motor, it delivers consistent power for cutting through tough grass and uneven landscapes. The engine boasts a low-emission system, making it an environmentally friendly option while still maintaining optimal performance. This balance of power and eco-friendliness is particularly appealing to those who are conscious of their carbon footprint.

In terms of cutting capabilities, the Murray 425604x18A offers a cutting width of 18 inches, allowing for easy maneuverability in tighter spaces. It is equipped with multiple cutting height adjustments, enabling users to achieve their desired lawn finish, whether they prefer a closely cropped look or a longer grass finish. The precision cutting technology ensures that each pass leaves a uniform and clean cut, promoting a healthier lawn.

Comfort and ease of use are also highlights of this mower. The ergonomic design includes an adjustable handle, ensuring that operators of all heights can find a comfortable grip. The lightweight construction enhances maneuverability, reducing fatigue during prolonged use. The mower’s large wheels provide excellent traction, making it suitable for various terrains, from hilly landscapes to flat gardens.

Another notable characteristic is the mower's ease of maintenance. The durable blade system is designed for simple sharpening and replacement, allowing users to keep their mower in top condition with minimal hassle. Additionally, the easy-to-access engine compartment simplifies routine checks and servicing.

The Murray 425604x18A is also designed with safety in mind. Features such as a safety switch ensure that the mower cannot be started accidentally, protecting users and bystanders alike.

Overall, the Murray 425604x18A combines power, efficiency, and ease of use, making it an outstanding choice for anyone looking to maintain their lawn effectively. With its thoughtful design and reliable performance, this mower stands ready to tackle the challenges of lawn care with confidence.
Top Page Image Contents