Citizen Systems iDP-3530 user manual Initial Setting, Maintenance

iDP-3530 User’s Manual

9. Initial Setting

Following are automatically set after Power-on.

(1)Printer head returns to its start position.

(2)SELECT (ON-LINE) or DESELECT (OFF-LINE) status may be chosen by the Dip Switches for Pre-Setting.

(3)Print buffer is cleared.

(4)Standard character mode is set.

(5)66 lines per page is set.

(6)The first line set at the present line.

(7)Designation of Red printing is cleared.

(8)For 7 bit data, character code SI is applied.

10. Maintenance

10-1 Maintenance Procedures

It is recommended that users perform periodic cleaning of their printer.

(1) Exterior

The exterior case of the printer can be cleaned with alcohol. Care should be taken to keep water from reaching the electronic parts and the printing mechanism.

(2) Interior

There is no particular requirement, however, when the printer case is opened to change settings etc., dust and other foreign matter may be removed from the printer mechanism and circuit boards with a soft brush.

Special care should be taken to avoid damage to electronic parts and wiring. Furthermore, be sure to disconnect the power plug from the electric outlet before opening the printer case.

CITIZEN 26