SPECIFICATIONS
A3.2
Dual Mono Integrated Amplifier
Power output at 1kHz for 0.5% distortion: | 115 Watts per channel into 8 ohms | |||
Total harmonic distortion 1kHz: |
|
| < 0.007% | |
Frequency response |
|
| 10Hz to 20kHz ± 0.3dB | |
Channel separation: |
|
| > 85dB 20Hz to 20kHz | |
Input sensitivity | line inputs: | 300mV, 200k ohms | ||
| phono input MM | 3.5mV, 47k ohms | ||
| phono input MC | 350µV, 47k ohms | ||
Signal / noise ratio | line inputs: | > 103dB | ||
(ref.120 Watts, 8 ohms ) |
|
| > 95dB unweighted | |
| phono MM: | > 96dB | ||
|
|
| > 89dB unweghted | |
| phono MC: | > 88dB | ||
|
|
| > 82dB unweighted | |
Power requirement: |
|
| 100 / 115 / 230Volts AC 50 / 60Hz | |
|
|
| (factory | |
Power consumption: |
|
| 400 Watts maximum | |
Dimensions: |
|
| 440 mm wide | |
|
|
| 95 mm high including feet | |
|
|
| 400 mm deep including terminals and volume knob | |
Weight: |
|
| 12.5kg unit only, unboxed | |
|
|
| 14.5kg in shipping carton | |
Standard accessories |
|
| IEC type mains lead | |
|
|
| Remote control (universal) | |
|
|
| 2 batteries (type | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice
Issue 3: March 2002 | A3.2 Integrated Amplifier | Instructions for use Page 9 of 9 |
|
|
|