GENERAL ADVICE

X-PLORA V8

GENERAL ADVICE

 

 

INSTALLATION PRECAUTIONS and USER INFORMATION

Your new X-PLORA V8 is designed and built to provide trouble-free performance, but as with all electronic devices it is necessary to observe a few precautions:

Heed all warnings shown on the back of the product.

Only connect the X-PLORA V8 to a mains outlet having the same voltage as marked at the back of the unit.

Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched off.

Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by items placed on them.

Do not use near water, or place water-filled containers on the X-PLORA V8, for example, a flower vase or potted plants. If water does spill inside, immediately pull out the mains plug from the wall socket and inform your dealer, who should then check the unit before further use. Entry of liquid into the X- PLORA V8 is dangerous, and may cause electric shock or fire hazard.

Do not place the unit near direct heat sources such as radiators, direct sunlight or other equipment.

Do not remove any covers or try to gain access to the inside. There are no internal adjustments or fuses you can replace yourself. Refer all service work to an authorised Musical Fidelity agent.

Note: Unauthorised opening of the equipment will invalidate any warranty claim.

Dust regularly with a soft cloth or soft brush but be careful when using cleaning or polishing agents - they may harm the surface finish.

The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected or damaged by lightning. For protection of your audio system during electrical storms, remove the mains plugs and disconnect any aerial lead.

If after-sales service is required, to help your dealer identify the X-PLORA V8 please quote the serial number located on the rear panel of the unit.

Issue 3: 19th October 2006

Page 3 of 14

 

 

Page 3
Image 3
Musical Fidelity X-V8 manual General Advice, X-Plora, INSTALLATION PRECAUTIONS and USER INFORMATION

FAQ

What precautions should I take when installing the X-PLORA V8?

Follow the warnings on the back of the product and only connect it to a mains outlet with the same voltage as marked on the unit. Position the mains lead and signal interconnects where they won't be walked on or trapped.

What should I do if water spills inside the X-PLORA V8?

Immediately pull out the mains plug from the wall socket and inform your dealer, who should check the unit before further use. Entry of liquid is dangerous and could cause electric shock or fire hazard.

How can I protect my audio system during electrical storms?

Remove the mains plugs and disconnect any aerial lead to protect your equipment during electrical storms.