3-component setup, standard power supply
X-PLORA V8
TRIPLE-X 
X-RAY V8
XT-100
Figure 1
The standard 3-component setup using the original TRIPLE-X PSU (bottom left) is shown in figure 1.
The power connector from the X-PLORAV8mates with the 4-way socket labelled X-PLORAV8on the rear of the TRIPLE-X PSU. The connector should fit comfortably with a small click when properly seated.
The power connector from the X-RAYV8mates with the 5-way socket labelled X-RAYV8on the rear of the TRIPLE-X PSU. The connector should fit comfortably with a small click when properly seated.
The power connector from the XT-100Integrated amplifier mates with the 6-way socket labelled XT-100on the rear of the TRIPLE-X PSU. The connector should fit comfortably with a small click when properly seated.
3-component setup, upgraded power supply
X-PLORAV8
TRIPLE-X170 
X-RAYV8
XT-100
Figure 2
The upgraded 3-component setup using the TRIPLE- X170 PSU (bottom left) is shown in figure 2.
The wiring is identical to that given under the standard setup shown above. Simply remove the TRIPLE-X PSU and use the TRIPLE-X170 PSU in its place.
4-component setup, upgraded power supply
X-PLORAV8
X-RAYV8
X-DACV8
XT-100
TRIPLE-X170
Figure 3
The recommended power supply wiring for the four- component setup, including upgrade power supply and X-DACV8, is shown in figure 3.
The power connector from the X-PLORAV8mates with the 4-way socket labelled X-PLORAV8on the rear of the X-DACV8. The connector should fit comfortably with a small click when properly seated.
The power connector from the X-RAYV8mates with the 5-way socket labelled X-RAYV8on the rear of the X-DACV8.The connector should fit comfortably with a small click when properly seated.
The XT-100integrated amplifier should be powered from the upgrade TRIPLE-X170power supply unit. Connect your XT-100to this supply through the 6-way XLR socket at the back. The X-PLORAV8and X- RAYV8 are now supplied from the X-DACV8. This frees up reserve supply for the power amplifiers in the XT100.
This is by no means an exhaustive list, as it is possible to use the original TRIPLE-X power supply, say, to supply the CD player alone further isolating it from the DAC and other circuits. The beauty of this system is its incredibly flexible allowing considerable tweaking to obtain optimum audio performance.
