Mustang Survival MD3084, MD3083 Usage Below Freezing, Re-arming Your PFD MD3081 and MD3082

Usage Below Freezing

When the temperature is below freezing, a fully discharged cylinder may not adequately inflate your Inflatable PFD. Under these conditions use the oral inflator to adequately top-up the PFD.

WARNING: CO2 inflation could over-pressurize and damage your Inflatable PFD if already orally inflated.

Re-arming Your PFD (MD3081 and MD3082)

NOTE: A re-arm kit (MA7203) is required for this procedure.

IMPORTANT: Follow instructions in the exact sequence below.

1)Unpack or open the Inflatable PFD so that the manual inflator is exposed (Fig. 8).

2)Remove the cylinder/bayonet assembly by rotating counter-clockwise and then pull out. Discard the used cylinder/bayonet assembly.

3)Check the new cylinder/bayonet assembly to ensure the o-ring is in

place and the sensor ring is attached (Fig. 8). Ensure that the CO2 cylinder has not been pierced (Fig. 11).

Inflatable PFD Owner’s Manual 8