Mustang Survival MD3091, MD3196 manual Attaching the MA3090 Harness, Quick-Release Features

8.Pull the buckle attachment webbing through the vest webbing. (Figure 31B).

9.Pass the female buckle through the buckle attachment webbing (Figure 31C) leaving the female buckle clip flush with the vest (Figure 31D).

10.Repeat steps 7-9 on the right-hand side of the vest.

11.Clip the left-hand male buckle (attached to the LP) into the female buckle attachment (attached to the vest), (Figure 32). Repeat on the right-hand side of the vest.

12.Fasten the buckle that connects the left- and right-hand lobes in front of the chest section of the vest (Figure 33). Cinch by pulling on the loose end of the webbing.

13.Ensure all buckles are securely fastened under the webbing, and all webbing adjustments are tight.

14.Secure excess webbing with Velcro™ straps

FIGURE 31A FIGURE 31B

FIGURE 31C FIGURE 31D

FIGURE 32

FIGURE 33

Quick-Release Features

NOTE: Found on some body armor (for example, IOTV).

1.Release the LP by pressing the side release buckles below each side of the LP and the chest buckle. This will completely release the LP from the front of the MOLLE vest.

2.Using the appropriate release mechanism, release the vest so it can be removed.

ATTACHING THE MA3090 HARNESS

1.Lay out the MA3090 harness assembly as shown (Figure 34):

•A. T-tab junction buckle

•B. Right-hand buckle (as worn)

•C. Left-hand buckle (as worn)

•D. Looploc

•E. Crotch strap buckle

11
	Compact Tactical LP Owners Manual