start with CHIPS followed by either the number 65550 or 6555X then followed by the matrix of resolution and colors.
17. Select Restart Windows to make the selected driver effective.
B.For Windows 95
The following describes normal display driver installation procedures for Windows 95. Use these procedures when installing the display drivers provided in the directory for Windows 95. The drivers are stored in the subdirectory named WIN95 in the diskette.
Click “Start”, then “Settings”, then “Control Panel”. Start the object "Display".
Select the page of "Settings", and click the "Change Display Type" button.
Choose the "Change" button in the "Adapter Type" area. Select the "Have Disk" button and press "OK".
Specify the path to the new driver and press the <ENTER> key: Example 1: Insert the drivers disk in the A: floppy drive, and enter
A:\WIN95.
Example 2: Type in the name of the directory where you copied the drivers, either on your local hard drive or on a network share.
Example 3: If you're not sure exactly where the drivers are, choose the "Browse..." button to find them.
The "Select Device" dialog box will appear. Select the adapter that corresponds to the one you installed in your machine and click OK. Windows 95 will copy the display drivers to the proper directories on your system.
Continue choosing Close until asked to restart your machine from the "Systems Settings Change" dialog box.
After the system has restarted, you can go back into the Display applet and select alternate screen resolutions and color depths.
