Mustek PP3000 Codes HEX/CONTROL 0C / FF, Codes HEX/CONTROL 0D / CR, Codes HEX/CONTROL 0E / SO

TM

CODES (HEX/CONTROL) : 0C / <FF>

FUNCTION : Page feed (form feed)

DETAIL DESCRIPTION : After data in the line buffer is printed out, feeds the paper to the top of the next page.

CODES (HEX/CONTROL) : 0D / <CR>

FUNCTION : Line feed (Same as LF)

APPLICATION LIMIT : When DIP SW 1-3 of parallel interfaced printer or DIP SW 3 - 3 of serial interfaced printer is set to ON, this code becomes invalid (which is the default).

DETAIL DESCRIPTION : Functions the same as an LF code.

CODES (HEX/CONTROL) : 0E / <SO>

FUNCTION : Select expanded character mode

DETAIL DESCRIPTION : Data following this code is printed in double-width characters.

CODES (HEX/CONTROL) : 0F / <SI>

FUNCTION : Select inverted print mode

APPLICATION LIMIT : This code is valid only when input at the beginning of a line, thus, normal and inverted characters cannot be mixed in the same line.

DETAIL DESCRIPTION : Data following this code is printed out in inverted characters (up side down and right to left).

APP. A STAR …

A - 3