| During playback, press the SKIP | once to skip to the beginning |
| of the next track on the disc or next programmed track in Program |
| Play mode. Thus, to sample each song, press PLAY and then tap |
| SKIP after you’ve heard a few seconds of each track. From Stop, |
| press the SKIP | button until you’ve reached the track from |
| where you want to start playback. Press Play to start playback. |
| 12. STAND-BY INDICATOR |
| The stand-by indicator turns on in green when the unit is |
| switched on, and changes to amber when switched to stand-by |
| mode. | | |
| REMOTE CONTROL | |
| A wireless remote control is provided with your compact disc |
| player, enabling you to operate play-back functions from the |
| comfort of your chair or from virtually anywhere in the room. For |
| reliable operation there should be a clear line-of-sight path from |
| the remote control to the front of the CD player. If the player does |
| not respond to remote commands, it may be that this line-of-sight |
| path is obstructed by clothing, paper, or furnishings. |
| Most of the buttons on the remote control handset have the same |
| effect as the corresponding buttons on the front panel of the disc |
| player. In addition the handset is equipped with some extra |
| buttons and functions, such as the numeric keypad and Program |
| functions. | | |
| POWER ON | | |
| Press this Green button to switch on the power to the disc player |
| from Standby mode. The LED will change from Amber to Green, |
| and the EFL display will illuminate. | |
| POWER OFF | | |
| Press this Red button to switch to Standby mode from power ON |
| mode. The LED will change from Green to Amber and the |
| display will go dark. | | |
| NUMERIC KEYPAD | |
| Using the direct-entry numeric keypad (1 to 10; +10) causes the |
| player to jump directly to the beginning of a numbered track and |
GB | commence play. Thus to play Track 5, simply press 5. To play |
Track 20, press: +10, 10. To play Track 36, press: +10, +10, |
+10, 6. | | |
PROGRAM
The C521i CD player allows for programmed playback of up to 20 tracks in any desired order. To engage Program Play with your desired track sequence in the memory:
1.Press PROGRAM. The “MEMORY” indicator will light up. The display indicates “Pr p:01”, meaning that the player is awaiting the first Program entry.
2.Use the SKIP or the Direct-Entry Numeric keypad buttons to select the first track in your planned sequence. The selected track number will blink in the display.
3.Press PROGRAM to store the selected track number in memory. The display will revert to show Program-Entry mode and advance to “Pr p:02”, showing that the player is ready for your second entry.
4.Repeat Steps 2 and 3 to select and store other track numbers in memory, up to a maximum of 20 entries. The display will show “FULL” when 20 tracks have been entered.
5.If you want to review or edit your program entries, press PROGRAM repeatedly to cycle the display through them. When the highest program number is displayed, you can enter additional tracks in the memory by repeating Steps 2 and 3.
6.To play the stored program, press PLAY “MEMORY” will appear in the display, indicating that a stored program is being played. During Program Play the SKIP buttons will access only the tracks in the program list. So if you want to play only a portion of a stored program, initiate play and press SKIP to jump over the programmed tracks that you don’t want to hear.
7.To terminate program play, press STOP. However the stored track list remains in memory; if you want to play the program again, simply press PLAY again. If you want to edit the program, press PROGRAM repeatedly to review the list and change. To add tracks, press the PROGRAM button until the highest program number is displayed.
8.To clear the program memory, press STOP, OPEN/CLOSE to open the drawer, or switch off the POWER.
The following example presents a step-by-step illustration of how to program and start Program Play to play tracks 5, 23, 9, 16, and 1.
While the CD player is stopped: | | |
Press on remote control | Display shows |
PROGRAM | Pr p:01 |
5 | 5 | p:01 |
PROGRAM | Pr p:02 |
+10, +10, 3 | 23 | p:02 |
PROGRAM r p:03 | Pr | p:03 |
9 | 9 | p:03 |
PROGRAM | Pr p:04 |
+10, 6 | 16 | p:04 |
PROGRAM | Pr p:05 |
1 | 1 | p:05 |
PROGRAM | Pr p:06 |
PLAY | | |
DELETE
The C521i CD Player allows the user to delete unwanted tracks in any desired order in either the Program Mode or the Stop Mode. To Delete tracks, use the sequence of commands below.
In Program Mode:
1.Press DELETE. The display indicates "dE d:01"; the player is now ready for first Delete entry. "dE" will change to first memory track after 1 second.
2.Use the I<<SKIP & SKIP>>I buttons to select the first track you would like to delete. The track number will flash.
3.Press DELETE again to store the selected track number in memory. The selected track number will be deleted in the display. The display will advance to next location. This showing that the player is ready for your second entry but cannot delete track above track 25.
4.Repeat Steps 2 and 3 to select the delete the track numbers in memory, up to a maximum of 20 entries.
5.To play the stored program, just press PLAY. During playing, the SKIP buttons will access only the tracks still listed. The deleted songs are not listed.
6.To clear the memory, press STOP twice ,OPEN/CLOSE to open the drawer, or switch off the power.
In Stop Mode:
1.Press DELETE. The display indicates "dE d:01" with total track time. The player is ready for the first Delete entry.
2.Use the Direct-Entry Numeric keypad buttons to select the first track you would like to delete. The selected track number will be deleted in the calendar display and the updated total playing time is shown on display.
