NAD C660 Manual Recording From External Source, 5Play the source device, To Stop The Recording

Recordings Chapter 3

RECORDING

COAXIAL REAR

OPTICAL REAR

(optical on the rear panel)

OPTICAL FRONT

(optical on the front panel)

ANALOG

CD-R

MANUAL

L CDR R

TRACK TIME

RECORD CD-R

MANUAL

L CDR R

GB

MANUAL RECORDING (FROM EXTERNAL SOURCE)

The recording can be started and paused at will.

1Press INPUT on the front panel or the remote control repeatedly until the desired input is displayed With each press of the button, the input changes as shown in the diagram on the left.

2Load a blank or non-finalized CD-R/RW disc on the record tray.

3Press AUTO/MANUAL on the remote control to select how tracks will be numbered on the recorded disc See page 19 for details.

4Press RECORD on the front panel or press REC on the remote control “RECORD” will flash, and “BUSY” will briefly appear. When the display returns to the track and running-time information, the unit is ready to record.

5Play the source device.

6Press PLAY on the record deck. Alternatively, press CD REC and then PLAY on the remote control “RECORD” will stop flashing and the recording will be started.

TO STOP THE RECORDING

Press STOP on the record deck.

Alternatively, press CD REC and then PAUSE on the remote control. “BUSY” and “UPDATE” will be displayed briefly.

TO PAUSE THE RECORDING

Press PAUSE on the record deck.

Alternatively, press CD REC and then PAUSE on the remote control.

To resume recording, press PLAY on the record deck.

Alternatively, press CD REC and then PLAY on the remote control.

TO PLAY OTHER MACHINES

As with all recorded CD-R/RW discs, the disc must be finalized before it can be played in other machines. See page 20 for details.

NOTE

•It is possible to listen to the sound while recording by selecting the appropriate input on your receiver, preamp or processor.

18