NAD C660 owner manual Playback Chapter

Playback Chapter 4

PLAYBACK

TRACK	TIME
CD
COAXIAL
	CDP
SINGLE	L	R
Track number	Elapsed time of
being played	the current track

GB

BASIC OPERATION

1Turn on the power and load a disc See page 13 for details.

2Press PLAY on the front panel for the appropriate deck. Alternatively, press CD PLAY or CD

REC for the desired deck and then PLAY on the remote control. will appear and the track number being played and the running time of the track will be displayed.

WHEN THERE IS A DISC IN EACH DECK

The player will respond in one of two ways depending on whether the dual play setting is activated or not. See page 26 for details.

IN NORMAL MODE (SINGLE PLAY MODE)

When the disc in one deck finishes, the disc in the other deck will begin to play.

IN DUAL MODE

Each deck will operate as a separate, single play CD unit without regard to the status of the other deck.

WHEN “ERROR” IS DISPLAYED

Non-finalized CD-R/RW discs will not play in the play deck. Play the disc in the record deck.

TO STOP PLAYBACK

Press STOP on the front panel for the appropriate deck.

Alternatively press CD PLAY or CD REC for the desired deck and then STOP on the remote control.

TO PAUSE PLAYBACK

Press PAUSE on the front panel for the appropriate deck.

Alternatively press CD PLAY or CD REC for the desired deck and then PAUSE on the remote control. Press either PLAY or PAUSE to resume playback.

TO SKIP THE TRACK

To skip forward to other tracks during playback, pause or stop, press FORWARD SKIP/SCAN on the front panel as many times as necessary, or press CD PLAY or CD REC on the remote control for the desired deck and then press FORWARD SKIP/SCAN. To skip backward, use REVERSE SKIP/SCAN.

TO SEARCH THE TRACK

To move forward through the disc, press and hold FORWARD SKIP/SCAN on the front panel, or press CD PLAY or CD REC on the remote control for the desired deck and then press and hold FORWARD SCAN. To move backward, use REVERSE SKIP/SCAN on the front panel or REVERSE SKIP/SCAN on the remote control.

PLAYING A SPECIFIC TRACK (DIRECT PLAY)

To go directly to a specific track on a disc, enter the track number using the numbered buttons.

When selecting a two digit track number, the second number must be entered within 3 seconds after the first number pressed.

INTRO SCAN PLAY

The first portion of each track will be played 10 seconds sequentially by pressing CD PLAY INTRO or CD REC INTRO button. When the CD PLAY INTRO or CD REC INTRO button is pressed again, the intro mode will be released. While the disc is being played as Intro Scan the Information Display will show track number and elapsed time.

22