OPERATION
USING THE C 715 – EXTERNAL SOURCES AND timer
ENGLISH
FRANÇAIS
ESPAÑOL
ITALIANO
DEUTSCH NEDERLANDS SVENSKA
РУССКИЙ
ACTIVATE TIMER OPERATION
When pressed, the TIMER button in the SR 7 remote control will activate several timer modes. Toggle [TIMER] to step through the following modes:
Timer off
Timer daily
Timer REC daily
Timer REC once
TIMER DAILY
1After setting up “On time” and “Off time” values, toggle [TIMER] button until “Timer Daily” appears. A timer indicator (red “clock face” icon) will illuminate in the VFD.
2Prepare for the timer playback by adjusting the volume, tune in to a station, load a disc and other applicable setup conditions.
3Turn OFF the C 715 by pressing the POWER button.
NOTE
When timer is activated and the C 715 at standby mode, the indicator above the POWER button interchangeably blinks from amber to blue. Everyday when the preset “On time” is reached, the C 715 will turn ON. When the “Off time” is reached, the C 715 will return to standby.
TIMER RECORDING
You can set up the C 715 to record a program via an external USB device at a desired time. Make sure to connect the external USB device into the front panel’s USB input beforehand.
1After setting up “On time” and “Off time” values, toggle [TIMER] button until “Timer REC once” or “Timer REC daily” appears. Timer indicator and “RECORD” will illuminate in the VFD.
2Prepare for the timer recording by tuning to the desired station.
3Turn OFF the C 715 by pressing the POWER button.
NOTE
When timer is activated and the C 715 at standby mode, the indicator above the POWER button interchangeably blinks from amber to blue. One minute before the preset “On time” is reached, the C 715 will turn ON and then starts recording when the “On time” is reached. When the “Off time” is reached, the C 715 will return to standby.
TIMER OFF
Toggle [TIMER] to select “Timer Off” if you do not want to activate timer operations. The timer indicator will be extinguished from the VFD.
22
