T585 Safety.qxd 3/23/2006 4:12 PM Page 20

ENGLISH FRANÇAIS DEUTSCH

Setup

CONNECTING TO A SURROUND SOUND SYSTEM

DOLBY DIGITAL SOUND

One can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic and 2 Channel Digital Stereo.

ABOUT DOLBY DIGITAL SOUND

Dolby Digital is the surround sound technology used in theatres showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs by connecting the T585 to a 5.1 channel A/V receiver equipped with a Dolby Digital decoder (AC-3) or Dolby Digital processor.

NEDERLANDS ESPAÑOL ITALIANO

To enjoy Dolby Digital sound from this DVD player you need the following:

DVD recorded in Dolby Digital surround format.

5.1-channel receiver equipped with a Dolby Digital decoder, or a Dolby Digital processor and power amplifier.

5 speakers and 1 sub woofer

From DIGITAL OUT jack (COAXIAL or OPTICAL)

75 ohm coaxial cable or optical cable

To digital input jack of surround receiver equipped with Dolby Digital decoder (coaxial or digital).

Front speaker (left)

Rear speaker (left surround)

From S-VIDEO / Component Video / Composite or SCART

S-VIDEO / Component / Composite 75–Ohm coaxial or SCART cable

To S-Video / Component / Composite or SCART inputs of receiver.

To S-video input or

Video input

Centre speaker

Rear Speaker (right surround)

Connection example

Front speaker (right)

Subwoofer

PORTUGUÊS SVENSKA

TO ENJOY DOLBY DIGITAL SOUND

You need to select from the OSD drop down menu of the T585, Audio, ‘Dolby Digital/PCM’ and ‘Sample Freq.’, ‘96 kHz’ or ‘48 kHz’. If uncertain, leave the default ‘Steam/PCM’ and ‘48 kHz’ from the menu. Do not connect the Digital Audio Output of this DVD player to your receiver unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital or DTS decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Selecting Digital Audio Output. (Refer to Initial Setup Settings, Audio).

NOTE

Refer to the owner’s manual of your audio equipment as well. Depending on your Dolby Digital surround sound decoder, the decode rate may be 96 or 48K. When you connect the T585 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. The output sound of the T585 has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect or disconnect the T585’s power cord. If you leave the receiver power on, the speakers may be damaged.

20

Page 20
Image 20
NAD T585 owner manual Connecting to a Surround Sound System, About Dolby Digital Sound, To Enjoy Dolby Digital Sound