NAD T585 Selecting Brightness Level, Selecting Contrast Level, Selecting Saturation Level

T585 Safety.qxd 3/23/2006 4:13 PM Page 29

Setup

INITIAL SETUP SETTINGS

SELECTING BRIGHTNESS LEVEL

Depending on the settings of your monitor, you may wish to adjust the brightness of the viewed media from your T585 instead of the monitor. The brightness can be fine tuned to your video monitor.

1From the drop-down menu of the OSD screen, use the navigation keys to select the video icon, and press the ENTER on the remote

2Using the navigation arrows, select “Brightness” and then press ENTER. Choose the level of brightness for your video monitor and press ENTER. The default setting is “0”

NOTE

•Please refer to the Reference section video adjustment chart on pages 28 and 33 regarding the features available on each video output.

SELECTING CONTRAST LEVEL

Depending on the settings of your monitor, you may wish to adjust the contrast of the viewed media from your T585 instead of the monitor. The contrast can be fine tuned to your video monitor.

1From the drop-down menu of the OSD screen, use the navigation keys to select the video icon, and press the ENTER on the remote

2Using the navigation arrows, select “Contrast” and then press ENTER. Choose the level of Contrast for your video monitor and press ENTER. The default setting is “0”.

NOTE

•Please refer to the Reference section video adjustment chart on pages 28 and 33 regarding the features available on each video output.

SELECTING SATURATION LEVEL

Both NTSC, PAL/PAL-60 allow SATURATION (colour level) adjustments to fine tune your monitor’s colour balance.

1From the drop-down menu of the OSD screen, use the navigation keys to select the video icon, and press the ENTER on the remote.

2Using the navigation arrows, select “Saturation” and then press ENTER. With this adjustment, you may set different colour levels for your video monitor and press ENTER. The default setting is 0.

NOTE

•Please refer to the Reference section video adjustment chart on pages 28 and 33 regarding the features available on each video output.

TV Aspect	+ 4
Picture Mode	+ 3
Signal Mode	+ 2
Black Level	+ 1
Brightness	0
Contrast	- 1
Saturation	- 2
Sharpness	- 3
Gamma	- 4
Video Output	All

TV Aspect	+ 4
Picture Mode	+ 3
Signal Mode	+ 2
Black Level	+ 1
Brightness	0
Contrast	- 1
Saturation	- 2
Sharpness	- 3
Gamma	- 4
Video Output	HDMI VGA YPbPr

TV Aspect	+ 4
Picture Mode	+ 3
Signal Mode	+ 2
Black Level	+ 1
Brightness	0
Contrast	- 1
Saturaton	- 2
Sharpness	- 3
Gamma	- 4
Video Output	All

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

29