NAD T 531 owner manual Enjoying 2 Channel Digital Stereo Sound, Enjoying DTS Sound

CONNECTIONS

PAGE 13

ConnectingtoSurroundSoundSystem(Cont’d)

Enjoying 2 Channel Digital Stereo Sound

2 Channel Digital Stereo

You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a digital audio input and speaker system (right and left front speakers).

To DIGITAL OUT (COAXIAL or OPTICAL)

		DIGITAL
		OUT
		COAXIAL
DIGITAL
OUT	S-VIDEO
	COMPONENT
OPTICAL	VIDEO	S-VIDEO
	OUTPUT	OUT

75 ohm coaxial cable or optical cable

To S-video Input or Video Input

S-Video cable or Video cable

AUDIO	COMPONENT	AUDIO
OUT2	VIDEO OUT	OUT1

L Pb L

R Pr R

YVIDEO

OUT

Connection example Receiver equipped with a digital audio input

To digital audio input

Front speaker (left)

TV

Front speaker (right)

Enjoying DTS Sound

❍Your A/V Receiver or processor must be equiped with a DTS Decoder.

❍The digital output (see selecting digital output pg 22) must be set to “stream”.

❍The disc must have a DTS soundtrack.

75 ohm coaxial cable or

optical cable

Receiver equipped	Connection example
with a DTS decoder

				To S-video Input
				or Video Input
				S-Video cable
To DIGITAL OUT	To S-VIDEO OUT			or Video cable
(COAXIAL or OPTICAL)		or VIDEO OUT
	DIGITAL	AUDIO	COMPONENT	AUDIO
	OUT	OUT2	VIDEO OUT	OUT1
	COAXIAL	L	Pb	L

To digital audio input

Front
speaker	Center
(left)	speaker

Front speaker (right)

Sub woofer

DIGITAL
OUT	S-VIDEO
		R	Pr	R
	COMPONENT
OPTICAL	VIDEO	S-VIDEO	Y	VIDEO
	OUTPUT	OUT		OUT

Rear speaker	Rear speaker
(left surround)	(right surround)

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Notes

❍Refer to the owner’s manual of your receiver as well.

❍Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

❍The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listen- ing level. Otherwise, the speakers may be damaged by a sudden high volume sound.

❍Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be damaged.