PAGE 14
CONNECTIONS
Connecting
to
Surround
Sound
System
(Cont’d)
Enjoying 2 Channel Digital Stereo Sound
2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a digital audio input and speaker system (right and left front speakers).
To DIGITAL OUT (COAXIAL or
OPTICAL)
75 ohm coaxial cable or optical cable
To
To
Connection example
Receiver equipped with a digital audio input
To digital audio input
Front speaker (left)
TV
Front speaker (right)
12V
TRIGGER
IN
Enjoying DTS Sound
❍Your A/V Receiver or processor must be equipped with a DTS Decoder.
❍The digital output (see selecting digital output page 25) must be set to “stream”.
❍The disc must have a DTS soundtrack.
To DIGITAL OUT (COAXIAL or
OPTICAL)
75 ohm coaxial cable or Optical Cable
To
To
| Receiver equipped | Connection example |
| with a DTS decoder |
|
To digital audio input |
| |
|
| Front speaker |
Front |
| (right) |
speaker | Center |
|
(left) | speaker |
|
12V
TRIGGER
IN
| Sub woofer |
Rear speaker | Rear speaker |
(left surround) | (right surround) |
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Notes
❍Refer to the owner’s manual of your audio system for operating instructions.
❍Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
❍The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listen- ing level. Otherwise, the speakers may be damaged by a sudden high volume sound.
❍Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be damaged.
