CONNECTIONS
PAGE 13
Connecting
to
Surround
Sound
System
(Cont’d)
Enjoying Dolby Pro Logic Surround Sound
Dolby Pro Logic Surround
You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital decoding. If your A/V receiver has a Dolby Pro Logic decoder, refer to the following connection diagram.
12V
TRIGGER
IN
Connect one or two rear speakers.
Note: The surround effect is greatly enhanced by using two surround speakers.
Connection example
To VIDEO OUT
Video cable
To AUDIO OUT
Audio cable
To audio input
Receiver equipped with Dolby Pro Logic Surround
To video input |
Front |
speaker |
(left) |
Rear speaker |
(left) |
●With a receiver equipped with Dolby Digital
Center speaker
Front |
speaker |
(right) |
TV
Rear speaker (right)
Connect the equipment the same way as described in “Enjoying Dolby Digital Sound” on the previous page. Refer to that receiver’s owner’s manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound.
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to “Selecting Digital Audio Output” on page 25).
