REAR PANEL

1

17

16

T 753 (AH) NORTH AMERICA

MS OUT

2

3

4

5

6

 

 

Serial No./No. De Series

 

 

+12V TRIGGER

7

8

 

 

 

POWER

ON

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

14

13

12

11

 

10

9

 

AC OUTLET

230V ~50HZ 120W 1A MAX

T 753 (C) EUROPEAN VERSION

ATTENTION!

Please make all connections to your T 753 receiver with the unit powered off or unplugged. (It is also advisable to power-down or unplug all associated components while making or breaking any signal or AC power connections.)

1FM & AM ANTENNA: The supplied wire “dipole” FM antenna will connect to the FM connector using the supplied “balun” adapter. It will usually work best when mounted on a vertical surface such as a wall, with arms fully outstretched forming a horizontal “T” perpendicular to the origin point of the signal. Experiment with placement and orientation of to yield the clearest sound and lowest background noise. In areas of difficult FM reception an external FM antenna can yield dramatic gains in quality; consult your NAD audio specialist or a professional antenna installer.

The AM loop antenna supplied with the T 753 (or a suitable replacement) is required for AM reception. Open the clip terminal lever, insert the wire and close, ensuring that the lever locks the wire in place. Testing different positions for the antenna may improve reception; vertical orientation will usually produce the best results. Antenna proximity to large metal objects (appliances; radiators) may impair reception, as will attempts to lengthen the wire to the loop.

NOTE: An external AM antenna can improve long-distance reception substantially; consult your NAD audio specialist or a professional antenna installer. Do not connect anything other than a loop antenna to the AM ANTENNA terminal. Do not remove the AM loop antenna.

2SOFT CLIPPING: Enables NAD’s proprietary Soft Clipping circuitry on all channels. Soft Clipping gently limits the output of the T 753 to minimize audible distortion, even should the receiver be over-driven.

NOTE: Soft Clipping may simply be left on at all times to reduce the likelihood of audible distortion from excessive volume settings. However, for critical listening, to preserve optimum dynamics you may wish to defeat it by setting this switch off.

3MONITOR OUT: Connect to video input of the monitor/television, using quality dual-RCA and/or S-Video cables designed for video signals. In general, the S-Video connection is superior and should be used if your TV/monitor provides the corresponding input.

NOTE: The T 753 “transcodes” S-Video to composite-video signals, so that S-Video signals connected to the DVD, SAT, VCR, and VIDEO 4-6 inputs will be present at both the S-Video and composite MONITOR OUT jacks when any of these inputs is selected. This provides the convenience of requiring only a single video connection (usually S-Video) between the T 753 and the TV/monitor.

4CD: Connect the analog stereo audio output from a CD player or other line-level audio source to this input.

5IR: These mini-jacks accept and output remote-control codes in electrical format, using industry-standard protocols, for use with “IR-repeater” and multi-room systems and related technologies. Consult your NAD audio specialist for more information.

6+12V TRIGGER IN/OUT:

TRIGGER IN connects to the 12-volt trigger outputs of compatible components such as power controllers and home automation devices. The TRIGGER AUTO/OFF switch selects the 12V Trigger Input and disables the remote and front panel ON function.

TRIGGER OUT connects to 12V Input of compatible devices (such as amplifiers and projector-lifts) to automate turn on/off or activation. See “Trigger Setup”, your NAD audio specialist also can provide more information on using the T 753’s triggers.

AUTO TRIGGER SWITCH when in the AUTO position, forces the T 753 to turn on only when a trigger signal is present at the trigger input. When in the OFF position, the trigger inputs are disabled.

7COMPONENT VIDEO IN 1-2; OUT: Connect the COMPONENT VIDEO IN 1, and 2 inputs to component-video outputs from compatible source components, typically a DVD player and terrestrial or satellite HDTV tuner. Connect the T 753 COMPONENT VIDEO OUT to the component-video input of a compatible video monitor/TV. Be sure to observe consistency in connecting the Y/Cr/Cb jacks (some source and TV components label these Y/

Pb/Pr) to the corresponding sources/inputs; do not rely purely on the colour-coding of the jacks, which may not always be consistent among brands. The routing of the component-video inputs follows the S-Video/composite, but is default as: COMPONENT VIDEO IN 1 is routed to the COMPONENT VIDEO OUT jacks when the DVD input is selected; COMPONENT VIDEO IN 2 is selected when the SAT input is active; the audio and digital inputs

12assigned to DVD, and SAT will be used (see also, "Input Setup”).

Page 12
Image 12
NAD T 753 owner manual Rear Panel, +12V Trigger IN/OUT

T 753 specifications

The NAD T 753 is a high-performance home theater receiver that exemplifies NAD's commitment to quality audio reproduction and innovative design. Known for its exceptional sound quality and versatility, the T 753 is designed to satisfy both casual listeners and serious audiophiles.

One of the defining features of the NAD T 753 is its robust power amplification. With a rating of 7 x 60 watts into 8 ohms, the receiver is equipped to handle a wide range of speakers and setups. The added Dynamic Power capability ensures that the receiver can deliver additional power during peak moments in audio playback, allowing for a more dynamic and impactful sound experience. This is particularly important when watching movies or engaging in immersive gaming, where transient sound effects can be demanding.

NAD has integrated their proprietary technologies into the T 753, notably the PowerDrive technology, which allows the receiver to efficiently manage power output across different impedance loads. This ensures that the T 753 maintains clarity and control even at high volumes, reducing the risk of distortion. Another key technology is the Soft Clipping feature, which gently limits the output signal when the system is pushed to its limits, preventing harsh clipping and preserving sound quality.

In terms of connectivity, the T 753 is versatile, equipped with multiple HDMI inputs that support both video and audio, making it compatible with the latest HD and 4K devices. The receiver also features component and composite video inputs, as well as digital and analog audio connections, ensuring it can integrate seamlessly into existing home entertainment systems.

The user-friendly interface of the T 753 includes an intuitive on-screen display that simplifies system setup and operation. Users can easily navigate menus and adjust settings to customize their listening experience. The inclusion of a remote control further enhances convenience, allowing users to control multiple devices from a single point.

One of the standout characteristics of the NAD T 753 is its capacity for multi-channel audio formats. It supports DTS, Dolby Digital, and other surround sound formats, creating an immersive audio environment ideal for movie nights or concerts. The receiver also includes a powerful built-in equalizer, allowing users to tweak audio frequencies to better suit their acoustics, ensuring a tailored audio experience.

In conclusion, the NAD T 753 represents a harmonious blend of power, versatility, and advanced technology. Its sound quality, coupled with comprehensive features and user-friendly design, makes it an outstanding choice for home theater enthusiasts looking to enhance their audio experience. Whether for music or movies, the NAD T 753 delivers exceptional performance that stands the test of time.