FRONT PANEL

11SOURCE : Use to select one of six inputs. Press repeatedly to step through the T 753’s audio/video inputs. The digital inputs are default assigned to the video input (DVD, SAT, VCR, VIDEO 4-5, CD) but can be arranged in any order using the T753’s SETUP OSD. The chart below shows the default assignments; see “Input Setup.”

Digital Input Jack

Default Assignment

OPT 1

DVD

OPT 2

SAT

Coax 3

VCR

Coax 4

VIDEO 4

Coax 5

VIDEO 5

Coax 6

CD

NOTE: Digital inputs take precedence: The T 753 will automatically play any active signal present at the selected digital input; if none is present, it will “fall back” to the analog audio input assigned to that Video input. Digital inputs can be selected OFF to listen to the analog input of a source with an assigned digital input.

12SURROUND MODE: Use to select the T 753’s Listening Mode. Press repeatedly to step through the T 753’s Listening Modes. See “About the T 753’s Listening Modes,” below.

NOTE: Depending on the format of the currently selected input (digital or analog; stereo or multichannel), different modes will be available. See “About the T 753’s Listening Modes,” below.

13LEVELS: Press repeatedly to select the channel, and then use the VOLUME(SETUP) knob to adjust the levels of the T 753’s 7 channels /pairs in turn: front-left, -center, –right; surround; surround back; subwoofer. The selected channel appears on the VFL and on-screen displays; use the VOLUME(SETUP) knob to adjust its level relative to the others over a range of ±12 dB. Channel levels may also be adjusted via the on-screen menus; see “Adjusting Channel Levels,” below.

NOTE: The HTR 2 remote’s [Surr.], [Center], and [Sub] / keys provide direct access to those channels’ relative levels, however in this case the level changes are only temporary and are not saved in memory.

14TONE DEFEAT: Press to disable the tone controls; press again to re-enable them for instance, to compare a tone setting to unmodified sound.

NOTE: While TONE DEFEAT is engaged, the TONE CONTROLS key will have no effect.

15TONE CONTROLS: Press to adjust treble using the VOLUME (SETUP) knob over a ±10 dB range; press again to adjust bass, and a third time to exit tone-control adjustment.

16SPEAKERS A & B: Press either speaker A or B or both to select the set of speakers you wish to listen to. The Speakers A are the main set of 6 multi- channel front and surround speakers. The Speaker B are an auxiliary set for remote locations such as other rooms of your home. For Speaker B selection all surround sound sources are downmixed to stereo as shown in the florescent display.

17VIDEO 6 INPUT: Use these convenience jacks for occasional sources, such as a camcorder, portable MP3 or tape player, or a video game console, or any other analog audio, or composite or S-Video video source. Select the Video 6 input using the HTR 2 remote, or the front-panel VIDEO 6 key.

18PHONES: Accepts stereo headphone using a standard 1/4-inch stereo phone plug (use a suitable adapter for headphones equipped with a smaller plug); set the Listening Mode to “Stereo.”

NOTE: For headphone listening the front left/right speakers must be set to “Large” on the OSD’s Speaker Settings page, otherwise headphone bass response will be restricted.

NOTE: Plugging in headphones will automatically switch the T 753 to “Stereo” mode.

ENGLISH

11

Page 10 Page 12
Page 11
Image 11
NAD T 763 owner manual Digital Input Jack
Page 10 Page 12

T 763 specifications

The NAD T 763 is a high-performance audio-video receiver that has garnered attention for its exceptional sound quality and versatile features. Designed for home theater enthusiasts, the T 763 combines advanced technologies to deliver an immersive audio experience, making it a recommended choice for both movie lovers and music aficionados.

One of the standout features of the NAD T 763 is its power output. It delivers 70 watts per channel into 8 ohms, ensuring that it can drive a variety of speakers with ease. This model integrates NAD's proprietary PowerDrive technology, which optimizes power delivery and ensures dynamic sound reproduction, even in demanding passages. This makes it suitable for a range of audio setups, from small living rooms to large home theaters.

The T 763 supports multiple audio formats, including Dolby Digital and DTS decoding. This capability allows users to enjoy high-fidelity soundtracks from DVDs and Blu-ray discs, creating an enveloping sound experience. Moreover, its compatibility with Pro Logic II means that it can effectively decode stereo signals into multi-channel formats, enhancing the listening experience for older media.

In terms of connectivity, the NAD T 763 does not disappoint. It features multiple inputs, including several HDMI ports, optical and coaxial digital inputs, and legacy connections like RCA for older equipment. This extensive range of connections allows users to integrate various sources, such as game consoles, streaming devices, and CD players with ease.

The T 763 also includes a user-friendly interface that simplifies operation. The intuitive on-screen menus make it easy to navigate through settings and customize audio performance. Additionally, the receiver comes with a remote control, providing convenience at your fingertips.

Another notable characteristic is the NAD's commitment to build quality. The T 763 is constructed with robust materials that enhance durability, ensuring that it can withstand years of use. The sleek design fits seamlessly into any audio-visual setup, appealing to aesthetic sensibilities alongside its performance capabilities.

In summary, the NAD T 763 is a versatile and powerful audio-video receiver that excels in sound quality and connectivity. With its innovative technologies and solid build, it stands out as a compelling option in the competitive landscape of home theater equipment. Whether for movie nights or music playback, the T 763 promises to elevate the home entertainment experience.
Top Page Image Contents