Nady Systems MRC-11X owner manual Recharging NI-CAD or NI-MH Batteries, Quick Look AT Your Radio

RECHARGING NI-CAD OR NI-MH BATTERIES

See Low Batteries Power Indication section on page 12, for instructions for determining when batteries are low.

Warning:

•Do not attempt to charge alkaline batteries. Non-rechargeable batteries can get hot or explode if you try to recharge them. Never attempt to charge non- rechargeable batteries.

•If you use rechargeable Ni-CAD or Ni-MH batteries, you can recharge them between uses externally in any appropriate commercially available charger or you can recharge them internally (in the unit) using the optional BC-11X adapter (see Optional Accessories Ordering Form included).

Please note: (1) Do not attempt to use any other adapter than the optional BC-11X for charging the batteries as they can damage the unit. (2) You cannot power the unit with the optional BC-11X as the unit can only be powered for operation with the internal batteries.

•Internally charging the batteries with the optional BC-11X charger:

1)Use the PWR/SET button to turn off the MRC-11X (the unit can not be charged when it is on)

2)Slide off the battery compartment cover, and install the batteries.

3)Connect the charger’s RS (Ring-Sleeve) plug to the radio’s PSG/CHG jack and plug its other end to a standard AC outlet.

4)A complete charge takes about 7 hours.

(Note: do not charge for longer periods as overcharging can damage the batteries)

8

A QUICK LOOK AT YOUR RADIO

	1
2	3	4

5

15

13

6

14

7

12

8

10

11

9

1.Antenna

2.DRV (driver headset) jack

3.PSG/CHG (passenger headset/internal charging) jack

4.PWR/SET (on-off/mode selected set) button (key)

5.LCD display

6.AUX (auxiliary music source input) jack

7.UP/DOWN (select) buttons (keys)

8.Internal microphone

9.Internal speaker

10.CALL button (key)

11.Battery compartment (on back)

12.MOD (mode select) button (key)

13.SCAN (scan/monitor select) button (key)

14.PTT (push-to-talk) button (key)

15.TX (Transmit) LED indicator

9