Do not attempt to service this unit yourself as it will void your warranty

USING YOUR PCM-100/200

The PCM-100/200 can be used with any standard mixer, powered mixer/amplifier, or mic preamp. Using either an XLR to XLR or XLR to 1/4" phone plug low impedance cable, connect the female XLR end to the PCM-100 and the other end (male XLR or 1/4" phone plug, as appropriate) to your equipment. NOTE: The PCM-100 requires +48VDC to operate. This phantom power is available on most mixer inputs or can be supplied by the optional SMPS-1 power supply.

The PCM-100/200 can be mounted on a microphone stand with the integral mic holder mount supplied. Depending on the threading of the mic stand you are using, you may need to remove the threaded adapter from the mic holder.

Be aware of the proximity effect (an increase in bass response) when the mic is placed close to the instrument. This may or may not be desirable. Experimenting with the position of the mic with respect to the audio source will ensure the optimum

results you are seeking in any given application.

If the microphone is placed too near a speaker during live stage use, an unpleasant howling effect (acoustic feedback) may occur. Although all microphones are prone to feedback to some extent, with a unidirectional polar pattern are specially designed to accept only signals from the audio source directly in front of the mic cartridge. Thus, the cardioid pattern of the PCM-100/200 ensures that it will deliver only the desired audio in front of the mic, rejecting the unwanted audio from the rear, even in noisy ambient conditions with high sound pressure levels from the P.A. and monitor speakers. This means that feedback will be greatly minimized with the PCM-100/200 in all live performance miking applications.

Some useful ways in which to totally eliminate annoying feedback include: experimenting with mic positions with respect to the speakers, decreasing speaker volume (whenever possible), and adjusting the equalization of the mic audio with the mixer.

FREQUENCY RESPONSE

 

 

 

 

 

 

 

 

 

 

PCM-100

 

 

 

 

 

 

 

 

 

 

PCM-200

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SERVICE

(U.S.) Should your Nady microphone require service, please contact the Nady Service Department via phone at (510) 652-2411 or e-mail at service@nady.com

(INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer from whom you pur- chased this product.

SPECIFICATIONS

CARTRIDGE TYPE:

LOAD IMPEDANCE: >1,000 Ohms

PCM-100: Black electret condenser

SELF NOISE (IEC 581-5): 22dB-A(PCM-100)

PCM-200: Dynamic

MAX INPUT SPL (@ 1kHz≤1% T.H.D)

POLAR PATTERN: Unidirectional (cardioid)

PCM-100: 127dB; PCM-200: 130dB

FREQUENCY RESPONSE

S/N RATIO: 72dB (PCM-100)

PCM-100: 30Hz to 18KHz

POWER REQUIREMENT: 48V DC Phantom power (PCM-100)

PCM-200: 60Hz to 16KHz

DIMENSIONS: 2.625" x 6.75" ( 66.7 mm x 171.5 mm)

SENSITIVITY (0dB=1V/Pa @ 1kHz)

WEIGHT: 1.4lb. (650g)

PCM-100: -36dB, ±2dB; PCM-200: -54dB, ±3dB

MATERIAL: Die-cast metal housing

OUTPUT IMPEDANCE (@ 1kHz)

 

PCM-100:

100

Ohms, ±30%;

Specifications subject to change for improvement purposes

PCM-200:

250

Ohms, ±30%

 

Page 1 Page 2
Page 2
Image 2
Nady Systems warranty PCM-100 PCM-200, Frequency Response, Service, Cartridge Type
Page 1 Page 2

PCM-200, PCM-100 specifications

Nady Systems, a prominent name in the wireless audio market, has developed notable products like the PCM-100 and PCM-200, designed for both professional and personal audio use. These units stand out due to their advanced technology and user-friendly features, ensuring high-quality audio transmission and reception.

The PCM-100 is a streamlined solution for those seeking simplicity without sacrificing performance. It operates on a UHF frequency band, providing a stable and interference-free signal. The unit offers a frequency response of 20Hz to 20kHz, capturing the full range of audio frequencies, making it suitable for music, vocals, and spoken word applications. One of its key features is automatic frequency selection, which allows users to find the optimal channel, thus minimizing dropouts and noise.

The build quality of the PCM-100 is tailored for durability, a crucial aspect for both stage and studio environments. The device is lightweight, making it easy to transport, yet robust enough to withstand use in dynamic settings. Its intuitive interface allows for easy operation, featuring LED indicators for power and signal strength.

On the other hand, the PCM-200 takes the technology a step further with enhanced features designed for more demanding applications. It supports dual-channel operation, accommodating two microphones or instruments simultaneously, making it perfect for duos or multiple performers. The PCM-200 also includes a comprehensive LCD display that provides critical information, including battery status, channel selection, and signal strength, enabling users to monitor their setup at a glance.

Both models utilize advanced digital encoding to ensure high-fidelity sound reproduction while minimizing latency. This is especially beneficial for live performances where timing is critical. The PCM-200 boasts a longer operating range than the PCM-100, providing flexibility for performers who need to move freely on stage.

Battery life is a significant consideration in wireless systems, and both the PCM-100 and PCM-200 excel in this aspect, offering long-lasting power to facilitate extended use without frequent replacements. The units are compatible with a diverse array of microphones and instruments, enhancing their versatility within various audio environments.

In summary, Nady Systems' PCM-100 and PCM-200 wireless systems embody cutting-edge technology and practical design features, catering to the evolving needs of audio professionals and enthusiasts alike. With their robust construction, reliable performance, and user-centric interfaces, they represent excellent choices for anyone seeking reliable wireless audio solutions.
Top Page Image Contents