Nady Systems X2 operating instructions Operation, T R O D U C T I O N, System Features, Receiver

AMERICAN STARPOWER™ X2

WIRELESS MICROPHONE SYSTEM OPERATING INSTRUCTIONS

IN T R O D U C T I O N

Congratulations on your purchase. The Nady American Starpower™ X2 is the perfect high performance entry-level wireless, with all the advantages of dual wireless microphone operation without cumbersome cords. Delivering clear, high-fidelity audio simultaneously from two microphones, the American Starpower™ X2 can be used for a broad range of home recreational wireless singing and speaking applications.

•All the advantages and freedom of wireless operation (without cumbersome cords)

•Easy to use — simply plug into your sound system

•High performance audio perfect for karaoke/recreational singers, DJ's, and many other applications

•VHF operation for reliable, interference-free performance

•100+ feet typical operating range — up to 200+ feet line-of-sight

SYSTEM FEATURES

DUAL RECEIVER

•Controls and connections for easy operation include front panel power ON/OFF switch, Power ON LED indicator, LED signal-received indicators for each channel, back panel 1/4” audio output jack (both channels mixed together), AC/DC power adapter, and dual fold-down retractable antennas

HANDHELD MICROPHONE TRANSMITTERS

•Easy, convenient operation with OFF/STANDBY/ON switch and transmitter ON LED

•Features a unidirectional dynamic cartridge for high audio performance with minimal feedback

•Operate up to 15 hours on a single 9V alkaline battery

OPERATION

(1)

(3)

(4) (7) (5) (7)

(3)

(6) (2)

RECEIVER

1.Plug the attached AC/DC ADAPTER (1) into the DC JACK (2) and into an empty wall outlet

2.Rotate and extend ANTENNAS (3) fully, angled at 60° position as shown

3.Switch the POWER (4) to the ON position. The POWER ON LED (5) will now light up and the receiver is operational

4.The 1/4” AUDIO OUTPUT JACK (6) provides a fixed, unbalanced MIC level audio output for connection to your mixer or home stereo microphone input jack with the 1/4” to 1/4” or 1/4” to RCA audio cables supplied. As when making any connection, make sure the connected equipment’s volume is at the minimum level before plugging in the receiver to avoid possible sound system damage

[Note: this output is the sum audio of the signals received by both the internal receivers]