18.3The DIGITAL DISPLAY always flashes before the battery is completely charged.
a.The incorrect battery type may have been selected. Reset the charger by briefly unplugging it or briefly disconnecting the negative battery clip.
Select the desired charge rate (small or regular battery) and battery type again, if necessary.
b.This will happen if the battery did not reach full charge within 24 hours. May be due to a very large battery or a bank of batteries requiring more power than a 1540 amp charger can deliver within 24 hours. The battery may also be faulty.
18.4Engine crank time is less than specified.
a.Starter motor may be drawing more than 125 amps. Charge the battery at the REGULAR BATTERY rate for 10 to 15 minutes then crank the engine.
18.5The Charged LED lights a few minutes after connecting to the battery.
a.The battery may be fully charged or recently charged, leaving the battery voltage high enough to appear to be fully charged. If the battery is in a vehicle, turn the headlights on for a few minutes to reduce the battery voltage and try charging again.
b.The incorrect battery type may have been selected. Reset the charger by briefly unplugging it or briefly disconnecting the negative battery clip.
Select the desired charge rate (small or regular battery) and battery type again, if necessary.
• 16 •
