8
FINISHING
LOUVRE BRACKET INSTALLATION
1. Align the holes in the lou- | FIGURE 14 |
| |
vre brackets with the pre- |
|
drilled holes in the firebox, as |
|
shown. |
|
2.Secure louvre brackets in place using screws.
L42 LOUVRE INSTALLATION
FIGURE 17
A
B
DOOR INSTALLATION
The upper louvres must be removed to allow the door to be removed. Release the two door latches, located across the top of the door and lift off the lower door bracket.
GDL42 LOUVRE INSTALLATION
Insert the upper louvres into the slots on both brackets.
UPPERLOUVRE
15
HINGE | Attach each hinge on the |
| lower louvre assembly to |
| the lip of the fireplace base |
| with 2 screws. |
| Position the hinge screen |
| into place and with the con- |
| trol door open, secure to the |
16 | fireplace using three |
screws. |
| UPPER LOUVRES |
| Insert the louvre tabs into the |
SLOT | slots located at the top left and |
| right corners of the unit. |
TAB |
|
A |
|
B | LOWER LOUVRES | ||
HINGE |
| Insert the hinge clips into the | |
SLOT | |||
CLIP | |||
| slots located at the bottom left | ||
|
| ||
|
| and right corners of the unit. | |
|
| To remove the louvres, pull the | |
|
| back tabs of the clips forward, | |
|
| while pushing the louvre assem- | |
|
| bly back. Lift the clip. |
LOGO PLACEMENT
Remove | the |
|
backing | of the |
|
logo supplied and |
| |
place on the glass | ½" | |
viewing door, as |
|
indicated.
LOGO
½"
FIGURE 18