6
FINISHING
MANTEL
The minimum distance from the top of the unit that the mantel can be installed is 0", at any depth.
When using paint or lacquer to finish the mantel, such paint or lacquer must be heat resistant to prevent discolouration.
CLEARANCE TO COMBUSTIBLES
| Sides | 0 inches |
|
|
| ||
| Back | 0 inches |
|
| Floor | 0 inches |
|
| Top | 0 inches |
|
|
|
|
|
FRAMING AND FINISHING
Nailing |
Tab |
Installation |
Sheet |
Metal |
Screw |
1.Choose fireplace location.
2.Place fireplace in position.
3.Frame in fireplace with header across the top. It is impor- tant to allow for the finished facing materials when setting the depth of the frame.
4.Remove the two screws from the sides of the fire- place and attach the nail- ing tabs with the screws.
5.To determine the final location of the nailing tab,
you must first determine the thickness of your fin- ishing material (i.e.
sheetrock/drywall) This will determine the dimension from the control panel front edge to the nailing tab. Secure with a sheet metal screw supplied.
6.Attach the nailing tabs to the frame.