Napoleon Fireplaces EPA 1100C specifications EPA 1100, 1100L, 1100C, 1400, 1400L & EPI, Fax

Models: EPI 1101 EPA 1100 EPA 1100C EPI 1401 EPA 1400 EPA 1900 EPA 1400L EPA 1100L

1 16
Download 16 pages 27.59 Kb
Page 1
Image 1
INSTALLATION AND OPERATION INSTRUCTIONS FOR

1

INSTALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER.

CERTIFIED UNDER U.S. ENVIRONMENTAL PROTECTION AGENCY (E.P.A.) JULY 1990 AND THE OREGON DEPARTMENT OF ENVIRONMENTAL QUALITY (D.E.Q.) PARTICULATE EMISSION STANDARDS BY E.E.M.C. THESE STOVES HAVE BEEN TESTED AND LISTED BY WARNOCK HERSEY LTD. TO STANDARDS: CSA B366.2 , ULCS627, ULC S628, UL 1482. MODEL 1100 HAS BEEN TESTED AND LISTED FOR INSTALLATION IN MOBILE HOMES.

INSTALLATION AND OPERATION INSTRUCTIONS FOR

HI-TECH LISTED SOLID FUEL BURNING STOVES AND INSERTS

FREE STANDING MODELS

INSERT MODELS

EPA 1100, 1100L, 1100C, 1400, 1400L & 1900

EPI 1101, 1401

WARNING:

If this unit is not properly installed, a house fire may result.

FOR YOUR SAFETY

Follow the installation directions. This unit can be very hot when burning. Combustible materials such as firewood, wet clothing, etc. placed too close can catch fire. Children and pets must be kept from touching the unit when it is hot. The chimney must be sound and free of cracks. Before installing your unit, contact the local building or fire authority and follow their guidelines.

Operate only with door tightly closed. Burn wood directly on firebricks. Do not use a grate or elevate the fire. At least 14 square inches (90 sq.cm.) of outside air must be admitted to the room or directly to the unit through a 4 inch (10cm.) diameter pipe. This unit is designed to burn natural wood only. Higher efficiencies and lower emissions generally result when burning air dried sea- soned hardwoods, as compared to softwoods or to green or freshly cut hardwoods. Do not start a fire with chemicals or fluids such as gasoline, engine oil, etc. Do not burn treated wood, coal, charcoal, coloured paper, cardboard, solvents or garbage which tend to produce more pollution than wood. Do not let the unit become hot enough for any part to glow red.

KEEP THE STOVE TOP TEMPERATURE BELOW 700°F (371°C). Attempts to achieve heat output rates that exceed design specifications can result in steel distortion and damage.

Wolf Steel Ltd., 24 Napoleon Rd.,

Barrie, ON., Canada L4M 4Y8 (705)721-1212

Fax: (705)722-6031

www.napoleonfireplaces.com

Email: ask@napoleon.on.ca

R-2000

W415-0360 / 11.05.02

Page 1
Image 1
Napoleon Fireplaces EPA 1100C specifications EPA 1100, 1100L, 1100C, 1400, 1400L & EPI, Barrie, ON., Canada L4M 4Y8, Fax