Check for leak
Your patio heater has been checked at all factory connections for leakage. To check the connections at the tube/regulator/cylinder.
1)Make leakage solution by mixing 1 part liquid dish soap and 3 parts water.
2)Spoon several drops (or use squirt bottle) of the solution onto the tube/regulator/cylinder connections.
3)Inspect the connections and look for bubbles.
4)If no bubble appears, the connection is safe.
5)If bubble appears, there is leak; loosen and
Disconnected cylinder when storage or transportation
1)Turn the knob at “OFF” position.
2)Open the access door, turn clockwise to disconnect cylinder from regulator.
SAFETY CHECK
Tube & regulator |
connection |
Regulator & cylinder |
connection |
10
