6
LIGHTING INSTRUCTIONS

Open lid.

Main Burner
Lighting
Turn left burner
control to high
position.
If ignition is not
immediate, turn
burner control
off. Wait 5
minutes.

Ensuring all burner controls

are in the off position,

slowly turn on the gas

supply valve. RIGHT
BURNER
LEFT
BURNER
IGNITER
LIGHTING
HOLE

Do not use back burner while operating main burner.

The propane cylinder is equipped with an excess flow device. Unless

all burners are turned off prior to turning the cylinder on, only small

flames and low heat will be achievable.

With left burner
operating on
high, turn the
centre and/or
right burner to
high.
Side Burner
Lighting
(optional)
Rear Burner
Lighting
Remove
warming rack.
Turn rear burner
control to high
position.
Open burner
cover.
If ignition is not
immediate, turn
burner control
off. Wait 5
minutes.
Turn igniter
knob clockwise
several times or
light by match.
Turn side
burner control
to high position.
If ignition is not
immediate, turn
burner control
off. Wait 5
minutes.
REAR
BURNER
CENTRE
BURNER
Press and hold
igniter button
until lit, or light
by match.
Press and hold
igniter button
until lit, or light
by match.
RIGHT
BURNER
LEFT
BURNER
IGNITER
LIGHTING
HOLE
REAR
BURNER
308SERIES 450SERIES