Three sample files were loaded on your hard drive when installed the User’s Software. There is a sample for each of the three modes of data logging.
Selecting a File to View
To view stored surveys on your computer...
1.Select View Stored Surveys from the Survey Data menu. A dialog box will appear titled Open Survey File. Normal downloaded survey files stored on the computer’s hard drive will be listed in the table on the left. Downloaded survey files are stored in a subdirectory labeled Svy. You can change drives, select which types of files are listed, or change directories from this box.
2.Select the data file you want to view from the list of files by either double clicking on it or highlighting it and choosing OK.
3.A new window labeled Logged Survey Data will appear. The file name will be shown to the right at the top of the window.
Logged Survey Data Window
The Logged Survey Data window is comprised of two parts:
1)The header section at the top of the window defines the equipment that was used to make the survey.
a)The first line shows the meter model number, serial number, Cal. Date, and calibration Due date.
b)The model number, serial number, Cal. Date, and calibration Due date of the probe used are shown on the second line.
c)Line three identifies whether or not probe frequency correction (PROBE CORRECTION) was used during the survey. Probe correction can be in the form of a frequency that was entered or a numeric correction factor.
110 | Operating the Meter |