12 . 1 
%
S T D 
27 . 5 
M A X 
C F 
1 . 0 0 
S T O P 
F1 F2 F3 F4
9.A screen will appear that indicates the average and maximum values of the reading that has been temporarily stored in memory and the number of the data point. The first data point will be 001.
D A T A P O I N T N O . 0 0 1
12 . 1 
%
S T D 
A V G 
27 . 5 
%
S T D 
M A X 
S A V E 
D I S C A R D 
F1 F2 F3 F4
10.Press F1 (SAVE) to permanently log this data point into the meter’s memory with its associated data point number. The meter will automatically return to the logged measurement screen.
11.Press F3 (DISCARD) to erase the data point from the meter’s temporary memory. The meter will automatically return to the logged measurement screen and display real time values.
12.Press F1 (START) again to begin the second spatially averaged data point. It will automatically be assigned data point 002 providing that you had saved the first data point. If you had elected to discard the first data point, then this point will be designated data point 001.
13.Press either F1 (SAVE) or F3 (DISCARD).
14.Continue to record up to 999
50 | Operating the Meter |