To initiate Mode 2 averaging (averaging to meet the
requirements of a specific standard)...
1.Make sure that the meter is set for the correct standard or change it if needed. See Chapter 11, Using the Standards Feature.
2.Make sure the meter is set to the correct frequency for the measurement you are making. See page 64.
3.Press number 2 on the keypad to select STANDARDS AVG from the averaging menu screen. Selecting Mode 2 averaging will automatically shut off Mode 1 averaging if it is on.
4.A new screen will appear stating that averaging has been enabled in accordance with a specific standard.
| A | V | E | R | A | G | I | N | G |
| E | N | A | B | L | E | D |
|
|
S | T | N | D | : |
| I | E | E | E | C | 9 | 5 | . | 1 | - | 1 | 9 | 9 | 9 |
L | E | V | E | L | : |
| C | O | N | T | R | O | L | L | E | D |
|
|
|
B | E | G | I | N |
|
|
|
|
| C | A | N | C | E | L |
| O | F | F |
| F1 |
| F2 |
|
|
| F3 | F4 | |||||||||||
5.Press F3 (CANCEL) to return to the initial time averaging menu screen to make another selection or press F4 (OFF) to turn time averaging off and return to the standard measurement screen.
6.Press F1 (BEGIN) to automatically return to the measurement screen with new options available for the function keys.
6 . 2 6 mW / c m 2
11 . 5 
M A X 
1 0 . 0 0 
G H z
S T A R T 
M E N U 
F R E Q 
Q U I T
F1 F2 F3 F4
Chapter 9 | 63 |