National Geographic 315NC Installing the Monitor, Installing the Remote Sensor, C/F Switchable

press the CH button until is displayed on the LCD. The monitor will auto-scroll through all the channels.

Press and hold the CH button if the outdoor temperature needs to be reset. The outdoor temperature of that particular channel will reset and display dashes (--.-°C). Press the TX button on the back of the sensor to force the sensor to send a transmission to the monitor, and then the current temperature should once again be displayed on the monitor.

Installing the Monitor

The monitor can be placed on any flat surface or mounted on a wall.

IMPORTANT:Do not place the monitor in direct sunlight or where exposed to any other sources of heat or air conditioning to ensure accurate tempera ture readings.

Installing the Remote Sensor

To prevent temperature interference, place the remote sensor outside away from direct sunlight, and rain. The remote sensor is designed to be splash proof; never immerse into water or expose to heavy rain.

Maximum and Minimum Memory

1.Press the MAX/MIN button once to display the minimum readings. Press the MAX/MIN button again to display the maximum readings.

2.To clear the memory, press and hold the MAX/MIN button when the max or min readings are displayed. This will reset the memory to the current temperature readings being displayed on the monitor.

°C/°F Switchable

The default measurement for temperature is °F, press the °C/°F button to toggle between °C and °F.

4