4.0 Date and Time
Setup
1.Press and hold the Date/Time
button until “12Hr” begins to flash.
2.Press the Set/Day button to toggle between 12Hr and 24Hr.
3.Press the Date/Time
button to confirm.
4.Next the seconds will begin to flash. Press the Set/Day button to reset the seconds to zero. Press the Date/Time
button to confirm.
5.The hour digits will begin to flash. Follow steps
NOTE: Press the Set/Day button to display the seconds or day of the week.
5.0 Setting the Alarm Time
1.Press the Alarm button to display the alarm time.
2.Press and hold the Alarm button until the
hour digits begin to flash.
3.Press the Set/Day button to toggle to the correct hour.
4.Press the Alarm button to confirm.
5.The minute digits will start to flash. Press
the Set/Day button to toggle to the correct minutes.
6.Press the Set/Day button to confirm.
7.Once the alarm time has been set, an alarm icon 
will be displayed above the seconds.
8.To turn off the alarm, press the Set/Day button in alarm mode, the alarm icon should no longer be displayed above the seconds. To turn on the alarm press the Set/
Day button again.
9.When the alarm sounds, press the Date/Time
button to stop the audible alarm, or press the SNZ button and the alarm will sound again after 8 minutes. If no button is pressed the alarm will sound for 30 seconds and then turn off.
6.0 °C/°F Switchable
Press the °C/°F button to toggle between Celsius and Fahrenheit.
7.0 Indoor
Temperature / Relative Humidity
Trend Arrows
The trend arrows indicate the trend of the temperature and relative humidity.
Up arrow – Indicates the temperature or humidity is increasing Steady arrow – Indicates the temperature or humidity is steady Down arrow – Indicates the temperature or humidity is decreasing
4
