©NationalInstruments Corporation 2-1 6527User Manual
2
Installing and Configuringthe 6527
This chapter describeshow to install and configure your 6527 device.

Installing Software

This sectiond escribes how to install your software.
Note Install your software before you install your 6527 device.
If you are using NI-DAQ,refer to your NI-DAQ release notes for specific
instructions on the software installation sequence. Find the installation
section for your operating system and follow the instructions giventhere.
Ify ou are using LabVIEW,LabWindows/CVI, or other National
Instrumentsapplication software packages, refer to the appropriate release
notes for exactdirections on i nstalling your software.After yo u have
installed yourapplication software,refer to your NI-DAQ release notes
and followthe instructio nsg iventhere for your operating system and
application softwarepackage.

Installing the 6527

This sectiond escribes how to install your hardware.
Note Install your software before you install your 6527 device.
Thefollowing are general installation instructions for each device. Consult
your computer or chassis user manual or technical reference manual for
specific instructions about installing new devices in your computer or
chassis.
Note Followthe guidelines in your computer docum entation for installing plug-in
hardware.