National Instruments cFP-PG-522, FP-PG-522 operating instructions

323356B-01 May 2003
© 2002–2003 National Instruments Corp. All rights reserved.
FieldPoint™, National Instruments™, NI™, and ni.com™ are trademarks of National Instruments Corporation.
Product and company names mentioned herein are trademarks or trade names of their respective companies.
Forpatents covering National Instruments products, refer to the appropriate location: Help»Patents in your software,
the patents.txt file on your CD, or ni.com/patents.
FieldPoint Operating Instructions
FP-PG-522 and cFP-PG-522
Eight-Channel Pulse Generator
with 2 A, 5–30 VDC Sinking Outputs
These operating instructions describe how to install and use the
National Instruments FP-PG-522 and cFP-PG-522 pulse generator
modules (referred to inclusively as the [c]FP-PG-522). For details
on configuring and accessing the [c]FP-PG-522 over a network,
refer to the user manual for the FieldPoint network module you are
using.
Features
The [c]FP-PG-522 is a FieldPoint pulse generator module with the
following features:
• Eight pulse-output channels
• User-powered 2A, 5–30 VDC sinking outputs
• 1s, 10 ms, or 100 µs resolution setting, configurable per
channel
• 16-bit on-time and off-time settings
• 100% duty cycle pulse support
• Finite and continuous pulse-generation modes
• Active/Inactive LED indicators
• 2,300Vrms transient overvoltage protection
• –40 to 70 °C operation
• Hot swappable