National Instruments cFP-PG-522, FP-PG-522 Safety, Electromagnetic Compatibility, CE Compliance

Operating shock

(IEC 60068-2-27)..............................50 g, 3 ms half sine,

18shocks at 6 orientations;

30 g, 11 ms half sine,

18shocks at 6 orientations

Safety

This product is designed to meet the requirements of the following

standards of safety for electrical equipment for measurement,

control, and laboratory use:

• IEC 61010-1, EN 61010-1

• UL 3121-1, UL 61010C-1

• CAN/CSA C22.2 No. 1010.1

For UL, hazardous location, and other safety certifications, refer to

the product label or to ni.com.

Electromagnetic Compatibility

CE, C-Tick, and FCC Part 15 (Class A) Compliant

Emissions..........................................EN 55011 Class A at 10 m

FCC Part 15A above 1GHz

Immunity...........................................EN 61326:1997 + A2:2001,

Table 1

Note For EMC compliance, you must operate this device

with shielded cabling.

CE Compliance

This product meets the essential requirements of applicable

European Directives, as amended for CE Marking, as follows:

Low-Voltage Directive (safety).........73/23/EEC

Electromagnetic Compatibility

Directive (EMC)............................... 89/336/EEC

Note Refer to the Declaration of Conformity (DoC) for

this product for any additional regulatory compliance

information. To obtain the DoC for this product,

clickDeclarations of Conformity Information at

ni.com/hardref.nsf/.