National Instruments cFP-PG-522, FP-PG-522 Where to Go for Support

FP-PG-522 and cFP-PG-522 14 ni.com
Mechanical Dimensions
Figure5 shows the mechanical dimensions of the FP-PG-522
installed on a terminal base. If you are using the cFP-PG-522,
referto your Compact FieldPoint controller user manual for the
dimensions and cabling clearance requirements of the Compact
FieldPoint system.
Figure 5. FP-PG-522 Mechanical Dimensions
Where to Go for Support
For more information about setting up the FieldPoint system, refer
to these National Instruments documents:
• FieldPoint network module user manual
• Other FieldPoint I/O module operating instructions
• FieldPoint terminal base and connector block operating
instructions
Go to ni.com/support for the most current manuals, examples,
and troubleshooting information.
For telephone support in the United States, create your service
request at ni.com/ask and follow the calling instructions or dial
512795 8248. For telephone support outside the United States,
contact your local branch office:
Australia1800 300 800, Austria 43 0 662 45 79 90 0,
Belgium32 0 2 757 00 20, Brazil 55 11 3262 3599,
Canada(Calgary) 403 274 9391,
Canada(Montreal) 514 288 5722,
Canada(Ottawa) 613 233 5949, Canada (Québec) 514 694 8521,
Canada(Toronto) 905 785 0085,
Canada(Vancouver) 514 685 7530, China 86 21 6555 7838,
109.5 mm
(4.31 in.)
91.44 mm
(3.60 in.)
107.19 mm
(4.22 in.)