National Instruments FP-1001, FP-1000 A

©

National Instruments Corporation A-1 FieldPoint FP-1000/FP-1001 User Manual

Appendix

A

Specifications

This appendix describes the specifications of the FP-1000 and FP-1001

network modules.

All FieldPoint network modules undergo extensive testing for operating

under rugged environmental conditions that exist in industrial

applications. FieldPoint network modules are designed and tested for

immunity and susceptibility, as well as for emissions.

Network

FP-1000...... .... .. .. .... .. .. .... ... .... .. .. .... .. .. . 1 RS -232 por t, 1 RS- 485

repeater port

FP-1001...... ...... .... ...... .... ....... .... .... ..... 1 RS -485 por t

Baud Rates..................................... ..... 300 , 1200, 24 00, 9600, 1920 0,

38400, 57600, 115200

(switchsettable)

Communication Parameters................1 Start Bit, 8 Data Bits, 1 Stop

Bit, No Parity

Integrity..............................................Checksum

Cabling Distance from Host*

FP-1000 .....................................50 ft (nomina l)*

FP-1001 .....................................400 0 ft ( nomi nal )*

* Refer to the RS-232 Interface Specifications and RS-485 Interface

Specifications sections in Chapter 2, Installation and

Configuration.

Maximum Terminal Bases per Bank ...9

Maximum Number of Banks...............25

RS-232/RS-485 Interface Chips......... . 15 kV ESD, Low noise and Slew

rate interface ICs

Contents

Main Page Important Information Warranty Copyright Trademarks WARNING REGARDING MEDICAL AND CLINICAL USE OF NATIONAL INSTRUMENTS PRODUCTS Page Page Tables National Instruments Corporation ix FieldPoint FP-1 000/FP-1001 U ser Manual About This Manual This manual describes how to install and use the FieldPoint FP-1000 and FP-1001 network modules. How to Use This Manual Set Organization of This Manual Conventions Used in This Manual ! Related Documentation Customer Communication FP-1000 and FP-1001 Network Module Overview FP-1000 Connects to RS-232 FP-1001 Connects to RS-485 Installation and Configuration Installing the Network Module Removing the Network Module Connecting Terminal Bases Connecting the FP-1000 to the Network Connecting the FP-1001 to the Network Connecting to the Serial Ports ! RS-232 Interface Specifications RS-485 Interface Specifications RS-485 Network Termination and Biasing Page Chapter 2 Installation and Configuration National Instruments Corporation 2-9 FieldPoint FP-1 000/FP-1001 U ser Manual Address Baud 12345678 Configuring the Network Module Figure 2-12. Address and Baud Rate Switch Rate Switch Cover (Removed) Setting the Network Address Page Setting the Baud Rate Connecting Power to the FP-1000 or FP-1001 Calculating Power for a FieldPoint Bank Feature Set Description High-Speed Local Bus Network Watchdog Timer SnapShot Feature Programmable Power-Up State HotPnP (Hot Plug and Play) HotPnP During Power-Up HotPnP During Operation Inserting New I/O Modules Replacing I/O Modules Page Power-On Self Test (POST) LED Indicators Page Using the FieldPoint Software FieldPoint Software Overview Using the FieldPoint Explorer Using the FieldPoint Server with BridgeVIEW Using the FieldPoint Server with LabVIEW Using the FieldPoint Server with LabWindows/CVI Using the FieldPoint Lookout Driver Using FieldPoint with Optomux Servers Appendix A Specifications Network Page Appendix B FTP Support Customer Communication Electronic Services Bulletin Board Support Telephone and Fax Support Telephone Fax Fax-on-Demand Support E-Mail Support (currently U.S. only ) FieldPoint System Configuration Form Host Computer FieldPoint Software FieldPoint Banks Technical Support Form Documentation Comment Form Title: Edition Date: Part Number: Mail to: Technical Publications Fax to: Technical Publications Glossary Page Index A B C D E F H I L M N O P