Index
FieldPoint FP-1000/FP-1001 User Man ual I-2 © National Instruments Corporation
F
fax and telephone support, B-2
fax-on-demand support, B-2
feature set description, 3-1 to 3-8
high-speed local bus, 3-1
HotPnP (Hot Plug and Play), 3-4 to 3-6
LED indicators, 3-7 to 3-8
network watchdog timer, 3-1 to 3-2
power-on self test (POST), 3-6 to 3-7
Programmable Power-Up State, 3-3 to 3-4
SnapShot feature, 3-2 to 3-3
FieldPoint banks
calculating power for bank, 2-13
maximum number of banks, 1-1
network watchdog timer, 3-1 to 3-2
SnapShot feature, 3-2 to 3-3
FieldPoint network modules. See also feature
set description.
overview, 1-1
specifications, A-1 to A-2
FieldPoint software, 4-1 to 4-4
FieldPoint Explorer, 4-2
FieldPoint Lookout driver, 4-4
Optomux Servers, 4-4
overview, 4-1
using FieldPoint Server
with BridgeVIEW, 4-2
with LabVIEW, 4-3
with LabWindows/CVI, 4-3
FP-1000
connecting to network, 2-3 to 2-4
connection to RS-232 port, 1-1
power connections, 2-12 to 2-13
FP-1001
connecting to network, 2-4 to 2-5
connection to RS-485 port, 1-2
power connections, 2-12 to 2-13
FTP support, B-1
H
HotPnP (Hot Plug and Play), 3-4 to 3-6
inserting new I/O modules, 3-5
module configuration results after
HotPnP replacement (table), 3-6
during operation, 3-5 to 3-6
overview, 3-4
during power-up, 3-4
replacing I/O modules, 3-5 to 3-6
I
installation, 2-1 to 2-13. See also configura-
tion of network module.
connecting to network
FP-1000, 2-3 to 2-4
FP-1001, 2-4 to 2-5
HotPnP (Hot Plug and Play) features,
3-4to 3-6
network module installation, 2-1 to 2-2
power connections for FP-1000 or
FP-1001, 2-12 to 2-13
calculating power for FieldPoint
bank, 2-13
removing network module, 2-2
serial port connections, 2-5 to 2-9
isolation of RS-485 interface (note),
2-5 to 2-6
RS-232 interface specifications,
2-6to 2-7
RS-485 interface specifications,
2-7to 2-9
terminal base connection, 2-2 to 2-3
I/O modules
inserting new, 3-5
module configuration results after
HotPnP replacement (table), 3-6
replacing, 3-5 to 3-6