National Instruments FP-1600, network module quick start Configure I/O Modules

10 Configure I/O Modules

A. Right-click on the device name in FieldPoint Explorer and select Edit this Device from the pop-up menu.

B. Click on the Channel Configuration button to bring up the Channel Configuration dialog box.

C. Select the type of channel to show, then select the channel(s) that you want to change. To select more than one channel, uncheck the One channel at a time box.

NOTE: Configuration options are module-dependent. The options listed here might not be available for your particular module. Refer to your I/O module operating instructions for details on configuration options.

14