DIN Rail Mount
C. Slide into position and lock the rail clip. Be careful not to bend any pins.
D. Repeat for each terminal base, up to nine for each network module in most cases. You can use one or two extender cables (which you can order separately) if your FieldPoint bank is too long for your available space.
E.Place protective cover on last base, and install rail locks at each end.
Panel Mount
D. Repeat for each terminal base, up to nine for each network module in most cases. You can use one or two extender cables (which you can order separately) if your FieldPoint bank is too long for your available space.
E. Place protective cover on last base.
4
