National Instruments network module IP address is the address of the FP-1600 on the network

E.In the FP-1600 Properties box, enter values for the IP address, Subnet mask, and Time server IP. You might also want to enter a comment to help you identify the FP-1600 module.

• IP address is the address of the FP-1600 on the network.

•Subnet mask is the mask that is applied to the IP address that the device uses to find other devices on the Ethernet network (255.255.255.0 is the most common).

•Time server IP is the address of the

host computer that the FP-1600 will synchronize its clock to. The computer must have the Lookout Time Synch service (installed with Lookout 4.x or FieldPoint 2.x).

FClick on Apply, then OK twice to return to the Comm Resource Configuration dialog box.

G.Click on Find Devices.

H.Expand the +FP Res item on the left side of the Explorer window to see the devices found on the network.

12