National Instruments cFP-Al-110, FP-Al-110 operating instructions

FP-AI-110 and cFP-AI-110

These operating instructions describe how to install and use the

FP-AI-110 and cFP-AI-110 analog input modules (referred to

inclusively as the [c]FP-AI-110). For information about

configuring and accessing the [c]FP-AI-110 over a network, refer

to the user manual for the FieldPoint network module you are

using.

The [c]FP-AI-110 is a FieldPoint analog input module with the

following features:

• Eight analog voltage or current input channels

• Eight voltage input ranges: 0–1 V, 0–5V, 0–10 V, ±60 mV,

±300mV, ±1V, ±5V, and ±10V

• Three current input ranges: 0–20, 4–20, and ±20 mA

• 16-bit resolution

• Three filter settings: 50, 60, and 500 Hz

• 250Vrms CAT II continuous channel-to-ground isolation,

verified by 2,300Vrms dielectric withstand test

• –40 to 70 °C operation

• Hot swappable

The FP-AI-110 mounts on a FieldPoint terminal base (FP-TB-x),

which provides operating power to the module. Installing the

FP-AI-110 onto a powered terminal base does not disrupt the

operation of the FieldPoint bank.