National Instruments cFP-Al-110, FP-Al-110 CE Compliance, Mechanical Dimensions

FP-AI-110 and cFP-AI-110 18 ni.com

CE Compliance

This product meets the essential requirements of applicable

European Directives, as amended for CE marking, as follows:

Low-Voltage Directive (safety).........73/23/EEC

Electromagnetic Compatibility

Directive (EMC)............................... 89/336/EEC

Note Refer to the Declaration of Conformity (DoC) for

this product for any additional regulatory compliance

information. To obtain the DoC for this product, visit

ni.com/certification, search by model number or

product line, and click the appropriate link in the

Certification column.

Mechanical Dimensions

Figure8 shows the mechanical dimensions of the FP-AI-110

installed on a terminal base. If you are using the cFP-AI-110,

referto the Compact FieldPoint controller user manual for the

dimensions and cabling clearance requirements of the Compact

FieldPoint system.

Figure 8. FP-AI-110 Mechanical Dimensions

109.5

[4.31]

91.44

[3.60]

107.19

[4.22]

Contents

Main FieldPoint Operating Instructions FP-AI-110 and cFP-AI-110 Eight-Channel, 16-Bit Analog Input Modules Features Installing the FP-AI-110 Installing the cFP-AI-110 Wiring the [c]FP-AI-110 Page Taking Measurements with the [c]FP-AI-110 Figure 4. Voltage Source without External Power Supply Figure 3. FP-AI-110 Analog Input Circuit Measuring Voltage with the [c]FP-AI-110 [c]FP-AI-110 Measuring Current with the [c]FP-AI-110 Figure 6. Current Source without External Power Supply Figure 7. Current Source with External PowerSupply Input Ranges Overranging Filter Settings Status Indicators Upgrading the FieldPoint Firmware Isolation and Safety Guidelines Page Safety Guidelines for Hazardous Locations Special Conditions for Safe Use in Europe Safety Guidelines for Hazardous Voltages Specifications Input Characteristics Effective resolution by input signal range and filter setting Input characteristics by filter setting Voltage Inputs Page Current Inputs Physical Characteristics Power Requirements Safety Isolation Voltage Environmental Shock and Vibration Safety Electromagnetic Compatibility CE Compliance Mechanical Dimensions Where to Go for Support 373280A-01 Jun05