National Instruments CFP-CTR-502, FP-CTR-502 Output Mode

© National Instruments Corp. 11 FP-CTR-502 and cFP-CTR-502
Output Mode
For each output channel select one of the following output modes
from the Value menu: Toggle, Reset Off; Toggle, Reset On;
OnPulse; or Off Pulse. The output modes work only if you select
Counter Channel 0–7 for the Output Source. The following
sections describe the different output modes.
Toggle, Reset Off
In Toggle, Reset Off mode, the output channel starts low and goes
high when the terminal count is exceeded. The output channel
returns to low the next time the terminal count is exceeded or when
you send a reset command to the associated count-input channel.
In Figure7, the terminal count is 4.
Figure 7. Output of a Channel Set to Toggle, Reset Off Mode
Toggle, Reset On
In Toggle, Reset On mode, the output channel starts high and goes
low when the terminal count is exceeded. The output channel
returns to high the next time the terminal count is exceeded or
when you send a reset command to the associated count-input
channel. In Figure8, the terminal count is 4.
Figure 8. Output of a Channel Set to Toggle, Reset On Mode
012340123401
Output
Count
Input
012340123401
Output
Count
Input