Chapter 3 Windows and Menus
© National Instruments Corporation 3-19 NI-FBUS Monitor User Manual

Filter by Address Tab

The Filter by Address tab filters data for a specific address or addresses.
The NI-FBUS Monitor detects and lists all the currently detected addresses
in the Detected Addresses box of the Filter by Address tab. The
NI-FBUS Monitor captures data only for the selected addresses, and no
other addresses. If you want to capture data for all addresses, click the
Clear All button to ensure that no other addresses are selected. If you want
to configure the filter before capture, use the User Defined field to insert
addresses into the address list. Select the Hex Addresses checkbox to view
the addresses in the Detected Addresses box in hexadecimal format. The
User Defined field interprets data entered as hexadecimal data.
Figure 3-11 shows the Filter by Address tab.
Figure 3-11. Filter by Address Tab
Settings Dialog Box
This dialog box contains optional settings for capturing data, displaying
data, and changing the toolbar. To bring up the Settings dialog box, select
Settings from the Capture menu.

Capture Settings Tab

The Capture Settings tab allows you to select the board to use, and to
specify what you want the NI-FBUS Monitor to do after it receives the
number of packets in the Max num of packets field. Figure 3-12 shows the
Capture Settings tab.