National Instruments NI 5422

As an Output (Continued)

Maximum

Output

Overload

–2 V to +7 V —

VOH Minimum: 2.7 V (open load), 1.3 V (50 Ω load) Output drivers are

+3.3 V TTL

compatible.

Measured with

a 1 m cable.

VOL Maximum: 0.6 V (open load), 0.2 V (50 Ω load)

Rise/Fall Time

(20% to 80%)

≤2.0 ns Load of 10 pF.

Table 6. (Continued)

Specification Valu e Comments

Contents

Main NI 5422 Specifications NI PXI-5422 16-Bit 200 MS/s Arbitrary Waveform Generator Contents CH 0 (Channel 0 Analog Output, Front Panel Connector) Page Page Page Figure 1. Normalized Passband Flatness, Direct Path Figure 2. Normalized Passband Flatness, Low-Gain Amplifier Path Figure 3. Normalized Passband Flatness, High-Gain Amplifier Path Figure 4. Pulse Response, Low-Gain Amplifier Path with a 50 Load Page Page Page Average Noise Density specification. Average Noise Density specification. Figure 8. Total Harmonic Distortion, Direct Path Figure 9. Total Harmonic Distortion, Low-Gain Amplifier Path Figure 10. Total Harmonic Distortion, High-Gain Amplifier Path Figure 11. Intermodulation Distortion, 200 kHz Separation (Typical) Sample Clock Page Page Onboard Clock (Internal VCXO) Phase-Locked Loop (PLL) Reference Clock CLK IN (Sample Clock and Reference Clock Input, Front Panel Connector) PFI 0 and PFI 1 (Programmable Function Interface, Front Panel Connectors) Page DIGITAL DATA & CONTROL (DDC) Optional Front Panel Connector Page Start Trigger Markers Page Arbitrary Waveform Generation Mode Page Calibration Power Software Environment NI PXI-5422 Environment Safety, Electromagnetic Compatibility, and CE Compliance Page Physical Where to Go for Support