National Instruments NI 783xR - page 52

Appendix A Specifications
© National Instruments Corporation A-7 NI 783xR User Manual
Onboard calibration reference
DC level..........................................5.000 V (±3.5 mV)
(actualvalue stored
in Flash memory)
Temperature coefficient..................±5 ppm/°C max
Long-term stability .........................±20 ppm/
Note Refer to Calibration Certificates at ni.com/calibration to generate a
calibration certificate for the NI783xR.
Bus Interface
PXI (NI PXI-783xR only)...................... Master, slave
PCI (NI PCI-783xR only) ......................Master, slave
Power Requirement
+5 VDC (±5%)
NI7 830R.........................................330 mA (typ), 355 mA (max)1
NI7 831R.........................................330 mA (typ), 355 mA (max)1
NI7 833R.........................................364 mA (typ), 586 mA (max)1
+3.3 VDC (±5%)
NI7 830R.........................................462 mA (typ), 660 mA (max)2
NI7 831R.........................................462 mA (typ), 660 mA (max)2
NI7 833R.........................................727 mA (typ), 1,148 mA (max)2
To calculate the total current sourced by the digital outputs use the
following equation:
Where j is the number of digital outputs being used to source current.
Power available at I/O connectors......... 4.50 to 5.25 VDC at 1 A total,
250m A per I/O connector pin
1 Does not include current drawn form the +5 V line on the I/O connectors.
2 Does not include current sourced by the digital outputs.
1,000 h
current sourced on channel i
i1=
j
∑