National Instruments NI PXI-8108 - page 63

Chapter 5 Troubleshooting
© National Instruments Corporation 5-3 NI PXI-8108 User Manual
As an alternative method, complete the following steps:
1. Power off the chassis.
2. Remove the controller from the chassis.
3. Press and hold down push-button switch SW2 for 2 to 3 seconds.
The switch location is shown in Figure 5-1.
4. Reinstall the controller in the chassis.
Figure 5-1. Clearing the CMOS Contents
1 Push-Button Switch SW2
1